2-R's Lures - A few more. Three different models

[Member]

Here are a few more out of the saw dust factory that is 2-R Lures

Bellow is the Narra-RR’s. I like the action on this one and know it catches fish. Well the proto type did anyway.

 






This little fella is the Topp-RR’s. Basically a surface walker. Tested this one and walks real well.

 





Next out of the factory is the Sknii-RR’s. Same lure profile as the Topp but with a bib. Have not had this one for a swim myself but gave an unfinished unit to Brad to paint for me and he tested it and says it has a good action.






I have been dipping for the top clear coat, has made the black in the eyes run. You get that.

Would like to learn how to use a air spray gun, but we will get there with that as well.
OK leave it to you for comments and suggestions.

Off to Bathurst this evening, see ya’s Tuesaday.

[Member]

They are the Cat's arse mate!!!..........I mean RR's

[Member]

i tried dipping .. a few people do do it but i found the clear is too thick usually unless you thin it and chips easier.

Get a cheap airbrush like Sel's and turn your compressor regulator down to around 50 - 60 psi and thin your clear coat down and do a few coats.

ah well my 2 cents anyway... look good and will catch fish no doubt.

[Member]

I am waiting for another RAG master class.

[Member]

I use 2pac colors no hardener then 2pac clear with hardener .. Tough clear . Have allsorts of Airbrushes . Cheap ones of fleabay seem good . Recently bought 3 suction feed with a 1mm nozzle for clear .... What did you use for the eye ?