Sweetwater Fishing Forums
Lure Lunatics => Lure Making => Topic started by: StevenM on October 03, 2012, 02:10:15 PM
-
Here are a few more out of the saw dust factory that is 2-R Lures
Bellow is the Narra-RR’s. I like the action on this one and know it catches fish. Well the proto type did anyway.
(http://i148.photobucket.com/albums/s20/Hi-Yo/1.jpg)
(http://i148.photobucket.com/albums/s20/Hi-Yo/2.jpg)
(http://i148.photobucket.com/albums/s20/Hi-Yo/3.jpg)
This little fella is the Topp-RR’s. Basically a surface walker. Tested this one and walks real well.
(http://i148.photobucket.com/albums/s20/Hi-Yo/4.jpg)
(http://i148.photobucket.com/albums/s20/Hi-Yo/5.jpg)
Next out of the factory is the Sknii-RR’s. Same lure profile as the Topp but with a bib. Have not had this one for a swim myself but gave an unfinished unit to Brad to paint for me and he tested it and says it has a good action.
(http://i148.photobucket.com/albums/s20/Hi-Yo/6.jpg)
(http://i148.photobucket.com/albums/s20/Hi-Yo/7.jpg)
I have been dipping for the top clear coat, has made the black in the eyes run. You get that.
Would like to learn how to use a air spray gun, but we will get there with that as well.
OK leave it to you for comments and suggestions.
Off to Bathurst this evening, see ya’s Tuesaday.
-
They are the Cat's arse mate!!!..........I mean RR's
-
i tried dipping .. a few people do do it but i found the clear is too thick usually unless you thin it and chips easier.
Get a cheap airbrush like Sel's and turn your compressor regulator down to around 50 - 60 psi and thin your clear coat down and do a few coats.
ah well my 2 cents anyway... look good and will catch fish no doubt.
-
I am waiting for another RAG master class.
-
I use 2pac colors no hardener then 2pac clear with hardener .. Tough clear . Have allsorts of Airbrushes . Cheap ones of fleabay seem good . Recently bought 3 suction feed with a 1mm nozzle for clear .... What did you use for the eye ?